Online tuner

Online Guitar & Bass Tuner

Tune guitar or electric bass through your microphone, or use the reference tones below. The detector shows the nearest note, frequency, and cents of error.

Microphone tuner

— Hz
— cents

Press start and play one note

Use one string at a time and let the note ring steadily. The needle shows pitch error in cents: negative is flat, positive is sharp.

Microphone access requires HTTPS (or localhost) and browser permission. Audio stays in the browser.

Guitar and bass reference tones

Use these buttons when microphone access is unavailable. Match the open string to the tone, listen for slow beating, and adjust until the beating disappears.

StringFrequencyInstrument
Bass E141.20 HzBass
Bass A155.00 HzBass
Bass D273.42 HzBass
Bass G298.00 HzBass
Guitar E282.41 HzGuitar
Guitar A2110.00 HzGuitar
Guitar D3146.83 HzGuitar
Guitar G3196.00 HzGuitar
Guitar B3246.94 HzGuitar
Guitar E4329.63 HzGuitar

Standard guitar tuning: E A D G B E

From the thickest string to the thinnest, standard guitar tuning is E2, A2, D3, G3, B3, and E4. The interval between most neighboring strings is a perfect fourth; G to B is a major third. Tune upward to the target pitch to reduce slack at the tuning post.

Stable reading: mute every string except the one being tuned and let the sustained part of the note—not the noisy first attack—drive the meter.

Online electric bass tuner guide

A four-string bass uses E1, A1, D2, and G2. Because these frequencies are low, use the neck pickup, reduce distortion, and pluck near the twelfth fret for a clearer fundamental. Five-string bass commonly adds B0 below E1; six-string bass may also add C3 above G2.

Frequently asked questions

How do I tune a guitar online?

Allow microphone access, pluck one open string, wait for a stable note name, and adjust until the cents value stays close to zero. Move from the lowest string to the highest.

Can this tune an electric bass?

Yes. Use the bass reference frequencies E1, A1, D2, and G2. Low notes need a clean attack and a few extra moments for the detector to settle.

What do cents mean on a tuner?

One semitone equals 100 cents. A reading of −12 cents is slightly flat; +12 cents is slightly sharp. Within roughly 5 cents is generally a practical target.

Why does the tuner jump between notes?

Room noise, overtones, old strings, and a hard pick attack can confuse pitch detection. Pluck gently near the middle of the string and mute the other strings.

Is the microphone recording uploaded?

The included script analyzes audio locally in the browser and does not contain upload code. Your hosting platform and browser permissions still determine the final privacy environment.